PeRT3 （具有協議使能功能的接收機和發射機容限測試儀）物理層測試和協議層測試之間的空白，為接收機測試和發射機測試提供了更新穎的、更智能化的測試能力。該產品主要是針對于串行數據的收發系統以及其他高速串行信號的通信系統。力科的PeRT3不僅僅是一款新的儀器，更是代表了一類具有完整的新的概念的測試儀器。610

詳細介紹

PeRT3 硬件平臺

PER-R008-S01-X
PeRT3 Phoenix R8 平臺

PER-R008-10U-X
PeRT Phoenix Upgrade to 8G to 10G Requires Unit to be in Serial Number range of above 90xx and 91xx Requires unit to be returned to Factory

PeRT3 Test Suite Options

SAS-R006-004-A
Eagle SAS Receiver Test Suite

SAT-R006-004-A
Eagle SATA Receiver Test Suite

PCI-R008-004-A
PCI Express® Gen 1 / Gen 2 / Gen 3 Receiver Test Suite

USB-R008-001-A
USB 3.0 Receiver Tolerance - Phoenix

PeRT3附件

PER-AC12-C01-X
SMA pair High End

PER-AC12-M01-X
SMA to SMP pair

PER-AC06-Q01-X
Rise Time Filters

PER-R008-ACS-X
PCIe Gen3 Tx/Rx/LinkEQ test accessories

PER-R008-ISI-X
SATA ISI Board for PeRT3 Phoenix and Eagle

Annual Calibration of PeRT3 Systems

PER-CA08-001-C
Annual Calibration of PeRT3 Phoenix 8G System

Bundled Warranty and Calibration of PeRT3 Systems

PER-CA08-W01-W
Three Year Warranty and Two Additional Years Calibration for Phoenix 8G 1 Channel System

PER-CA08-WX1-W
Five Year Warranty and Four Additional Years Calibration for Phoenix 8G 1 Channel System

新問題的新解決辦法

許多下一代高速串行標準，協議層可優化物理層，比如為長且有噪聲的傳輸通道設置合理的發送接收均衡。這需要PeRT3這類新型儀器來執行標準的接收測試，以及在協議層上和發送端進行通信。因此PeRT3可用于集成的發送端和接收端測試，優化測試時間，降低設備數量和連接復雜性。

什么是協議支持能力

帶協議支持能力的BERT系統，是能夠和被測設備進行協議握手，例如均衡訓練，并執行電氣特性測量的儀器。

什么是PeRT3

PeRT3結合了BERT系統的物理層測試能力，以及和被測物進行協議握手和訓練的能力。

關鍵特性

· 帶協議支持能力的誤碼率測試儀

· 可用于接收機抖動和容限測試的抖動生成功能。

· 內置3階去嵌發生器

· 支持協議的發生器和接收機狀態機

· 用戶可自定義測試腳本，用于抖動容限、均衡優化，搜索和多參數的掃描測試。

· 用戶可自定義協議握手和訓練的狀態機。

Generator Data Out		Generator Jitter Stress
Bit Rate	1 Gb/s to 8.5 Gb/s	Random Jitter Source
Step Size	100Khz	10 Khz – 1.5Mhz RMS Jitter	1.2 – 9 pSec RMA
Rise/Fall Time (20-80%)	35 pSec typical	1.5 Mhz- 100Mhz RMA Jitter	1.2 – 12 pSec RMS
Differential Amplitude Range	50mV to 2.2V, 5mV steps	1.5 Mhz – 1000Mhz RMS Jitter	1.2 – 12 pSec RMS
Voltage Offset	-2V to +2V	Sinusoidal Jitter Source
Intrinsic Jitter	12 pSec pp typical with internal clock	10 Khz- 100Khz Jitter	100 – 15000 pSec
De-Emphasis		100Khz – 500Khz Jitter	100 – 2000 pSec
# taps	3	0.5 Mhz – 1000Mhz Jitter	0 – 300 pSec
Range	-0.5dB to -9dB	Common Mode Source
Step	0.1dB	100Mhz – 1000Mhz Jitter	50 – 350 mV
SSC Support	23Khz-33Khz		Sinusoidal waveform
	-5000ppm to +5000ppm	Differential Mode Source
	Triangular/Sinusoidal waveforms	100Mhz – 2500Mhz Jitter	0 – 30 mV
Connector:	K-Type female		Sinusoidal waveform
Interface	Differential or single-ended, DC coupled, 50 ohm	External Jitter Injection
Single error inject:	Adds single error on demand	Frequency range	0.5 ~ 100 Mhz
Generator Clock Out		Modulation range	1 ~ 200 pSec
Clock Rate	At rate divided by any integer between 1-255	Input impedance	50 ohms
Duty cycle	40-60%	Amplitude range	60-600 mV
Amplitude	0.1 Vpp-Diff to 2Vpp-Diff	Interface	DC coupled, 50 ohms
Output voltage window	-2V-2V	Connector	SMA female
Interface	Differential or single-ended, DC coupled, 50 ohm	Data In
Connector	SMA female	Data Rates	1 Gb/s to 8.5Gb/s
		Input impedance	50ohms
Protocol Supported		Amplitude range	200 – 1800 mV
PCI Express	2.5, 5 and 8 Gb/s	Clock In
SAS	1.5, 3 and 6 Gb/s	Frequency range	1 Ghz to 8.5 Ghz
SATA	1.5, 3 and 6 Gb/s	Termination	50 ohms
USB3.0	5Gb/s	Amplitude range	600 – 1200 mV
		Tigger Out
		Amplitude range	600 – 800 mV
		ISI	External

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，紡織服裝機械網對此不承擔任何保證責任。溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。