上海榮計達儀器科技有限公司
上海榮計達儀器科技有限公司
| 參 考 價 | 面議 |
產品型號JM-III
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2024-02-14 15:43:01瀏覽次數：117次
聯系我時，請告知來自 紡織服裝機械網加速磨光機,公路土工試驗儀器
加速磨光機用于室內模擬汽車輪胎對公路路面的磨光作用，通過對路面所用骨料進行加速磨光，借以測得骨料的磨光值，以評價骨料的抗磨光性能,從而為選用合適的面層骨料鋪筑不同摩檫系數要求的路段以及為合理開發利用石料資源提供科學依據，為縮短防滑路面的研究周期創造條件，為研制優質人造骨料提供技術參考。
Aggregate accelerating sander is used to simulate the polishing effect of auto tires on highway pavements. By accelerating and polishing the aggregates used in pavements, the calendering value of aggregates is measured to evaluate the anti-wear performance of aggregates. Therefore, in order to select suitable surface layer aggregates to lay the road sections with different Capricorn coefficient requirements and provide scientific basis for rational development and utilization of stone resources, to create conditions for shortening the research cycle of non-slip road surface, and provide technical reference for the development of high quality artificial aggregate.
加速磨光機技術參數:
★電源電壓 AC380V 50HZ
★道路輪轉速 320±5轉/分
★橡膠輪對道路輪上試件總壓力 725±10N
★橡膠輪： 半徑200×44mm 硬度69IRHD±3IRHD
其中：標記C橡膠輪用于磨粗砂，標記X橡膠輪用于磨細砂
★金剛砂 (30號棕剛玉、280號綠碳化硅)
★外形尺寸：800X800X1200mm
★重量：220kg
Aggregate accelerated sanding machine technical parameters:
★Power supply voltage AC380V 50HZ
★Road wheel speed 320±5 rev / min
★The total pressure of the test piece on the rubber wheel to the road wheel 725±10N
★Rubber wheel: Radius 200×44mm Hardness 69IRHD±3IRHD
Among them: marked C rubber wheel for grinding coarse sand, marked X rubber wheel for grinding fine sand
★ Emery (No. 30 brown corundum, No. 280 green silicon carbide)
★Dimensions: 800X800X1200mm
★ Weight: 220kg
加速磨光機結構:
★傳動機構：包括電機、同步齒輪、橡膠輪總成等，用于傳遞動力、改變速比。
★道路輪裝置：用于安裝試件14塊。
★溜砂裝置：由貯砂斗、支架和溜砂機構組成，用于存貯磨料和控制溜砂。
★供水系統：包括儲水支架、供水器皿、流量計、水管，用于控制溜水量。
★荷載調整機構：包括手輪、凸輪，用以支撐配重，調節橡膠輪與道路輪之間的壓力。
★配重裝置：包括杠桿，配重及護罩等，用于保證對道路輪的規定壓力。
★試模：用于制作石料磨光試件。
★電器控制裝置：用于控制道路輪所需轉動圈數及送砂量的多少。
Aggregate accelerated sanding machine structure:
★ Transmission mechanism: including motor, synchronous gear, rubber wheel assembly, etc., used to transmit power and change speed ratio.
★Road wheel device: used to install 14 test pieces.
★ Sand-sanding device: It consists of sａnd storage bucket, bracket and sand-sliding mechanism for storing abrasive and controlling sａnd sliding.
★Water supply system: including water storage bracket, water supply vessel, flow meter, water pipe, used to control the amount of water.
★ Load adjustment mechanism: including hａnd wheel and cam to support the weight and adjust the pressure between the rubber wheel and the road wheel.
★ Counterweights: including levers, counterweights and shrouds, etc., to ensure the specified pressure on the road wheels.
★ Test mode: used to make stone polishing specimens.
★Electrical control device: used to control the number of turns required by the road wheel and the amount of sand.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
