納米孔氣凝膠復合絕熱制品測厚儀產品簡介：
納米孔氣凝膠復合絕熱制品測厚儀是**檢測儀器，適用于由納米孔氣凝膠復合絕熱制品厚度的測量。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系，由上海榮計達儀器科技有限公司提供，具有結構簡單、操作方便、測量范圍大等特點。設備質保期一年，一年內產品如有質量問題，供方負責免費維修。如果因操作不當或者人為損壞，我公司亦應提供維修、更換服務，由此產生的費用我公司會酌情收取。
I. Nanoporous aerogel composite thermal insulation product thickness gauge Product introduction:
Nanoporous aerogel composite thermal insulation product thickness measuring instrument is a testing instrument suitable for measuring the thickness of nanoporous aerogel composite thermal insulation products. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff, which is provided by Shanghai Rongjida Instrument Technology Co., Ltd. It has the characteristics of simple structure, convenient operation and large measurement range. The warranty period of the equipment is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged at our discretion.
納米孔氣凝膠復合絕熱制品測厚儀技術參數：
★壓板壓強：350Pa。
★測量厚度：0～30mm。
★分度值：0.1mm。
★試件尺寸：200×200mm。
★外型尺寸：250×250×260mm。
★百分表量程：0～10mm。
★精度：0.01mm。
★壓板尺寸：200×200mm。
Technical parameters of thickness measuring instrument for nanoporous aerogel composite thermal insulation products:
★ Platen pressure: 350Pa.
★ Measured thickness: 0 ～ 30mm.
★ Dividing value: 0.1mm.
★ Test piece size: 200 × 200mm.
★ External dimensions: 250 × 250 × 260mm.
★ Dial indicator range: 0 ~ 10mm.
★ Accuracy: 0.01mm.
★ Platen size: 200 × 200mm.
納米孔氣凝膠復合絕熱制品測厚儀使用方法：
Third, the use of nano-hole aerogel composite thermal insulation product thickness gauge:
★按照圖樣，裁取200×200mm試樣三個
★將壓板放到試驗臺上，調整可調支架，設置百分表初始位置。
★輕輕抬起測厚儀的百分表，將被測試樣放到底板與壓板之間，并對齊。
★輕輕放下測厚儀的百分表，使其與試樣上的壓板接觸，待百分表讀數穩定后讀數，精確到0.1mm。此時讀數減去初始數據，即為試樣厚度。
★ According to the drawing, cut out 200 × 200mm three samples
★ Put the pressure plate on the test bench, adjust the adjustable bracket, and set the initial position of the dial indicator.
★ Gently lift the dial indicator of the thickness gauge, place the test sample between the bottom plate and the pressure plate, and align them.
★ Gently lower the dial indicator of the thickness gauge so that it is in contact with the pressure plate on the sample. After the dial indicator reading stabilizes, the reading is accurate to 0.1mm. At this time, the reading minus the initial data is the thickness of the sample.
GB T 34336-2017 納米孔氣凝膠復合絕熱制品
壓板重量1400-1428-1457克
GB T 34336-2017 Nanoporous aerogel composite thermal insulation products
Platen weight 1400-1428-1457 g
QQ:2568841715
