一、產品簡介：
紙面石膏板材受潮撓度試驗箱是**檢測儀器，按照國家對石膏板試樣的標準養護要求而設計制造的。產品符合JC/T799-2007標準設制的采用智能型數字儀表控制保證溫度在32℃，相對濕度90%，是石膏檢測行業試驗單位的儀器。
Product introduction:
The paper surface gypsum board moisture deflection test box is a testing instrument designed and manufactured in accordance with the state's standard maintenance requirements for gypsum board samples. The product complies with the JC / T799-2007 standard and is equipped with intelligent digital instrument control to ensure that the temperature is 32 ° C and the relative humidity is 90%. It is an instrument for the test unit of the gypsum inspection industry.
二、技術參數：
?控溫范圍：32±2℃
?控制精度：±1℃
?控濕范圍：90%±3
?電源：220V-50HZ
?電熱器：2000W
?制冷劑：氟里昂12
?壓縮機功率：650W
?加濕功率：90W
?重量：約280Kg
?容積：500*250*9或600*300*11（mm）的3組。
Second, the technical parameters
? Temperature control range: 32 ± 2 ℃
? Control accuracy: ± 1 ℃
? Humidity control range: 90% ± 3
? Power supply: 220V-50HZ
? Electric heater: 2000W
? Refrigerant: Freon 12
? Compressor power: 650W
? Humidification power: 90W
? Weight: about 280Kg
? Volume: 3 groups of 500 * 250 * 9 or 600 * 300 * 11 (mm).
三、產品結構：
?外殼為鋼板，內箱體為不銹鋼板加工而成，保溫層為泡沫塑料，體輕耐用，防腐，箱門采用磁膠條封閉，具有造型美觀、控溫精度高等一系列優點。
?配備密閉式制冷機組，運行平穩、噪音小。
?加熱器采用不銹鋼管加工而成，防銹防腐，延長了使用壽命。
?用數字式控溫儀控制冷卻系統，以達到自控目的。
?加濕系統采用超聲波加濕器加濕，選用專用溫度控制儀控制箱內溫度。
Third, the product structure
? The outer shell is made of steel plate, and the inner box is made of stainless steel. The thermal insulation layer is foam plastic, which is light and durable, and anti-corrosive.
? Equipped with a closed refrigeration unit, which runs smoothly and has low noise.
? The heater is made of stainless steel tube, which prevents rust and corrosion and prolongs the service life.
? Control the cooling system with digital temperature controller to achieve self-control purpose.
? Humidification system uses ultrasonic humidifier for humidification, and a special temperature controller is used to control the temperature in the box.
四、工作原理：
?由加熱系統和制冷系統產生升溫和降溫，用控制儀進行調控。
?當溫度低于(箱內溫度)32℃時，控溫儀繼電器開始工作，箱內溫度32℃時，電熱器停止升溫，保持箱內32℃恒溫，當箱內溫度高于32℃時，制冷系統開始工作，箱內溫度低于32℃時，制冷系統停止工作，保持箱內32℃±1℃，這樣反復連續工作，達到水泥試體養護工作。
?恒濕控制采用超聲波加濕加濕，控濕儀控制，當箱內濕度達不到所需濕度時，加濕器自動向箱內加濕，達到自動停止，以保箱內濕度恒定在90%。
Fourth, the working principle
? The heating and cooling systems generate heating and cooling, which are controlled by a controller.
? When the temperature is lower than (inside the box) 32 ° C, the temperature controller relay starts to work. When the temperature inside the box is 32 ° C, the electric heater stops heating up and keeps the constant temperature in the box at 32 ° C. The refrigeration system starts to work. When the temperature inside the box is lower than 32 ° C, the refrigeration system stops working and keeps the temperature in the box at 32 ° C ± 1 ° C. This way, the continuous work is repeated to achieve the cement specimen maintenance.
? Constant humidity control adopts ultrasonic humidification and humidification, controlled by a humidity controller. When the humidity in the box does not reach the required humidity, the humidifier automatically humidifies the box and stops automatically to ensure that the humidity in the box is constant at 90%.
會員1.png)
QQ:2568841715
