榮計達 輪廓標耐密封測量裝置參數LKB-MF
LKB-MF 面議縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
上海榮計達儀器科技有限公司
會員1.png)
上海榮計達儀器科技有限公司
| 參 考 價 | 面議 |
產品型號STT-980
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-10-15 12:14:18瀏覽次數：78次
聯系我時，請告知來自 紡織服裝機械網硅芯管冷彎曲半徑試驗儀按照中華人民共和國交通行業標準JT/T496-2004《公路地下通信管道高密度聚乙烯硅芯塑料管》中硅芯管冷彎曲半徑試驗方法研制的。該設備簡潔直觀，是生產及質量監督檢驗部門的設備。
硅芯管冷彎曲半徑試驗儀是**檢測儀器，適用于測定低溫下硅芯管的抗彎曲性能。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。
Silicon core tube cold bending radius tester is a testing instrument, which is suitable for measuring the bending resistance of silicon core tube at low temperature. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.
硅芯管冷彎曲半徑試驗儀按照中華人民共和國交通行業標準JT/T496-2004《公路地下通信管道高密度聚乙烯硅芯塑料管》中硅芯管冷彎曲半徑試驗方法研制的。該設備簡潔直觀，是生產及質量監督檢驗部門的設備。
Silicon core tube cold bend radius tester was developed in accordance with the People's Republic of China Transportation Industry Standard JT / T496-2004 "High-density polyethylene silicon core plastic pipe for highway underground communication pipelines". The equipment is simple and intuitive, and is the equipment of the production and quality supervision and inspection department.
硅芯管冷彎曲半徑試驗儀技術參數：
能夠滿足直徑在32-63mm不同直徑的地下通信管道高密度聚乙烯硅芯塑料管。
其他檢測設備：溫度能控制在-20℃±2℃的低溫箱。
樣 品：取3根1.5米(當外徑大于40mm時2m)長的硅芯管作為試樣用于產品的彎曲性能試驗，試驗前試樣應放置在-20℃±2℃溫度下保持2h。
判定規則：試樣經過彎曲試驗后，應不出現開裂、裂紋或明顯應力發白現象
Technical parameters of silicon core tube cold bending radius tester:
It can meet the high-density polyethylene silicon core plastic pipes for underground communication pipelines with different diameters between 32-63mm.
Other testing equipment: low temperature box whose temperature can be controlled at -20 ℃ ± 2 ℃.
Samples: Take three silicon core tubes with a length of 1.5 meters (2m when the outer diameter is greater than 40mm) as samples for the bending performance test of the product. Before testing, the samples should be placed at -20 ℃ ± 2 ℃ for 2h.
Judgment rule: After the sample is subjected to a bending test, it should not show cracks, cracks or obvious stress whitening
硅芯管冷彎曲半徑試驗儀電鍍部份請以機油擦拭，以防止生銹宜保光亮，硅芯管冷彎曲半徑試驗器外表經常擦拭，保持清潔。
The electroplated part of the silicon core tube cold bend radius tester should be wiped with oil to prevent rust and should be bright. The surface of the silicon core tube cold bend radius tester should be wiped frequently to keep it clean.
硅芯管冷彎曲半徑試驗儀冷結構組成：
該儀器由支撐底座及五個不同直徑的標準輪轂組成，每個輪轂有3-5對壓固螺栓壓固片構成。
Cold structure of silicon core tube cold bending radius tester:
The instrument consists of a support base and five standard hubs with different diameters. Each hub consists of 3-5 pairs of compression bolts.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
